STANLEY FATMAX FME340K-QS

STANLEY FATMAX FME340K-QS: Workshop Positioning & Cutting Capabilities

Positioned as a versatile workhorse for North American shops and jobsites, the STANLEY FATMAX FME340K-QS brings STANLEY FATMAX’s proven mechanical endurance to daily fabrication. The combination of an agile Top Handle (D-Handle) architecture and an efficient 120V / 6.5 Amp Corded drive allows operators to steer the STANLEY FATMAX FME340K-QS through complex contours and bevel joints with repeatable accuracy.

STANLEY FATMAX FME340K-QS is engineered for dependable woodworking precision and clean curve severance. Features 120v / 6.5 amp corded, multi-stage orbital action, and tool-free T-shank blade changes for jobsite and home remodeling projects.

Capable of severing up to 3-3/8 in. (85 mm) in solid lumber, 3/8 in. (10 mm) in mild sheet steel, and 13/16 in. (20 mm) in aluminum profiles, the STANLEY FATMAX FME340K-QS offers the capacity needed for finish remodeling, electrical box rough-ins, and bespoke woodworking joinery.

Verified Factory Specifications & Physical Dimensions

Below are the verified manufacturer specifications and physical parameters for the STANLEY FATMAX FME340K-QS:

• Power Platform: 120V / 6.5 Amp Corded
• Grip Configuration: Top Handle (D-Handle)
• No-Load Stroke Rate: 0–3.200 SPM
• Stroke Length: 13/16 in. (20 mm)
• Cutting Capacity in Wood: 3-3/8 in. (85 mm)
• Cutting Capacity in Steel: 3/8 in. (10 mm)
• Cutting Capacity in Aluminum: 13/16 in. (20 mm)
• Bare Tool Weight: 4.9 lbs. (bare tool)
• Bevel Range: Positive detents at 0°, 15°, 30°, and 45°
• Blade Shank Standard: Universal keyless T-shank clamp

Motor Architecture & Vibration Damping Dynamics

Engineered for steady workshop duty, the 120V / 6.5 Amp Corded motor in the STANLEY FATMAX FME340K-QS produces a responsive 0–3.200 SPM cadence. Balanced rotational counterweights minimize lateral tool wander, helping woodworkers maintain perpendicular cut faces across solid stock.

The contoured D-handle housing on the STANLEY FATMAX FME340K-QS gives the operator authoritative two-handed leverage when pushing through heavy structural timber. Micro-textured grip zones reduce hand slip in dusty conditions while dampening reciprocating pulses from the gearcase.

Shoe Base Engineering, Bevel Accuracy & Cut-Line Clarity

Engineered with a die-cast alloy foot, the STANLEY FATMAX FME340K-QS glides steadily across sheet goods without marring pre-finished veneers. Left-and-right bevel adjustments up to 45 degrees enable accurate chamfer cuts, complemented by effective forward debris ejection.

Keyless Blade Clamp & Orbital Action Settings

Changing blades on the STANLEY FATMAX FME340K-QS requires zero tools thanks to a spring-loaded quick-change chuck. Pulling the external release lever disengages the locking tangs for instant, safe blade replacement with standard T-shank accessories.

The STANLEY FATMAX FME340K-QS incorporates a multi-stage orbital action selector that tailors the blade’s forward stroke swing to the material at hand:

• Setting 0: Vertical reciprocation without orbital swing. Essential for sheet metals, copper tubing, PVC, and chip-free cuts in double-sided melamine veneers.
• Setting 1: Subtle orbital oscillation. Recommended for dense hardwoods like white oak, hard maple, and birch plywood to balance edge smoothness with cut progress.
• Setting 2: Medium pendulum swing. The workhorse setting for general softwood framing (2x4, 2x6) and construction lumber.
• Setting 3: Maximum aggressive orbital thrust. Delivers blistering feed speed for rough dimensioning, timber framing, and demolition work where speed outweighs edge cosmetics.

Frequently Asked Questions About the STANLEY FATMAX FME340K-QS

Does the STANLEY FATMAX FME340K-QS come packaged with a battery and charger?

In its standard bare-tool configuration, the STANLEY FATMAX FME340K-QS ships as tool-only to save money for users already invested in the 120V / 6.5 Amp Corded battery ecosystem. Retail combo kits that bundle lithium-ion packs and fast chargers are also widely stocked.

What battery size offers the best balance on the STANLEY FATMAX FME340K-QS?

For general workshop and cabinetry tasks, a 4.0 Ah or 5.0 Ah 120V / 6.5 Amp Corded battery provides the optimal equilibrium between extended continuous runtime and tool maneuverability. Ultra-compact 2.0 Ah slim packs are great for overhead scribing, while larger 6.0 Ah to 8.0 Ah packs suit high-volume jobsite framing.

Can I use universal Bosch-style T-shank blades in the STANLEY FATMAX FME340K-QS?

Yes. The keyless clamp is fully compatible with all standard T-shank blades from Bosch, Diablo, Milwaukee, DEWALT, and Festool, allowing you to choose any tooth geometry or material rating.