WORX WX478.1

WORX WX478.1: Workshop Positioning & Cutting Capabilities

With the WORX WX478.1, WORX delivers a purpose-built cutting platform tailored for exacting cabinetry installations, sink cutouts, and interior framing. Powered by an adaptive 120V / 5.9 Amp Corded system and encased in an ergonomic Top Handle (D-Handle) layout, the WORX WX478.1 maintains unwavering cut squareness even under continuous jobsite duty.

WORX WX478.1 is engineered for dependable woodworking precision and clean curve severance. Features 120v / 5.9 amp corded, multi-stage orbital action, and tool-free T-shank blade changes for jobsite and home remodeling projects.

Its verified cutting depths of 3-1/2 in. (90 mm) in hardwoods and softwoods, 5/16 in. (8 mm) in steel plate, and 11/16 in. (16 mm) in extruded aluminum ensure the WORX WX478.1 handles both delicate curved scrollwork and aggressive jobsite dimensional cuts without bogging down.

Verified Factory Specifications & Physical Dimensions

Below are the verified manufacturer specifications and physical parameters for the WORX WX478.1:

• Power Platform: 120V / 5.9 Amp Corded
• Grip Configuration: Top Handle (D-Handle)
• No-Load Stroke Rate: 1.000–3.100 SPM
• Stroke Length: 13/16 in. (20 mm)
• Cutting Capacity in Wood: 3-1/2 in. (90 mm)
• Cutting Capacity in Steel: 5/16 in. (8 mm)
• Cutting Capacity in Aluminum: 11/16 in. (16 mm)
• Bare Tool Weight: 5.1 lbs. (bare tool)
• Bevel Range: Positive detents at 0°, 15°, 30°, and 45°
• Blade Shank Standard: Universal keyless T-shank clamp

Motor Architecture & Vibration Damping Dynamics

Engineered for steady workshop duty, the 120V / 5.9 Amp Corded motor in the WORX WX478.1 produces a responsive 1.000–3.100 SPM cadence. Balanced rotational counterweights minimize lateral tool wander, helping woodworkers maintain perpendicular cut faces across solid stock.

The contoured D-handle housing on the WORX WX478.1 gives the operator authoritative two-handed leverage when pushing through heavy structural timber. Micro-textured grip zones reduce hand slip in dusty conditions while dampening reciprocating pulses from the gearcase.

Shoe Base Engineering, Bevel Accuracy & Cut-Line Clarity

Engineered with a die-cast alloy foot, the WORX WX478.1 glides steadily across sheet goods without marring pre-finished veneers. Left-and-right bevel adjustments up to 45 degrees enable accurate chamfer cuts, complemented by effective forward debris ejection.

Keyless Blade Clamp & Orbital Action Settings

The WORX WX478.1 features an intuitive keyless blade clamp engineered for rapid changeovers. Inserting a T-shank blade engages positive mechanical locking with a reassuring tactile click, while the lever-action release ensures safe removal without burning your fingers.

To balance rapid lumber severance against splinter-free face cuts, the WORX WX478.1 provides selectable orbital pendulum levels:

• Setting 0: Vertical reciprocation without orbital swing. Essential for sheet metals, copper tubing, PVC, and chip-free cuts in double-sided melamine veneers.
• Setting 1: Subtle orbital oscillation. Recommended for dense hardwoods like white oak, hard maple, and birch plywood to balance edge smoothness with cut progress.
• Setting 2: Medium pendulum swing. The workhorse setting for general softwood framing (2x4, 2x6) and construction lumber.
• Setting 3: Maximum aggressive orbital thrust. Delivers blistering feed speed for rough dimensioning, timber framing, and demolition work where speed outweighs edge cosmetics.

Frequently Asked Questions About the WORX WX478.1

Is the WORX WX478.1 sold as a bare tool or a kit?

Most retailers list the WORX WX478.1 as a Bare Tool (tool-only), which is ideal for tradespeople who already own WORX 120V / 5.9 Amp Corded batteries and chargers. If you are starting fresh on this platform, search for starter bundles that include a battery pack, charger, and carrying bag.

How long does a single charge last on the WORX WX478.1?

Runtime varies with material density and feed rate, but a standard 4.0 Ah or 5.0 Ah pack typically delivers between 70 and 120 linear feet of cuts through 3/4-inch plywood or pine before requiring a recharge cycle.

Will old-style slotted blades fit the WORX WX478.1?

The tool’s quick-release chuck requires universal T-shank accessories with lateral retaining tangs. Slotted U-shank blades lack the side tangs necessary for tool-free mechanical engagement and should not be used.