Festool TRION PS 300 EQ Jigsaw

Festool TRION PS 300 EQ Jigsaw: Workshop Positioning & Cutting Capabilities

With the Festool TRION PS 300 EQ Jigsaw, Festool delivers a purpose-built cutting platform tailored for exacting cabinetry installations, sink cutouts, and interior framing. Powered by an adaptive 720-Watt 120V AC system and encased in an ergonomic Top Handle (D-Handle) layout, the Festool TRION PS 300 maintains unwavering cut squareness even under continuous jobsite duty.

A time-tested timber framing and cabinet shop classic. Combines high-torque 720W MMC electronics with carbide guide jaws for rock-solid right-angle cuts through thick lumber.

Its verified cutting depths of 4-3/4 in. (120 mm) in hardwoods and softwoods, 3/8 in. (10 mm) in steel plate, and 25/32 in. (20 mm) in extruded aluminum ensure the Festool TRION PS 300 handles both delicate curved scrollwork and aggressive jobsite dimensional cuts without bogging down.

Verified Factory Specifications & Physical Dimensions

Below are the verified manufacturer specifications and physical parameters for the Festool TRION PS 300 EQ Jigsaw:

• Power Platform: 720-Watt 120V AC
• Grip Configuration: Top Handle (D-Handle)
• No-Load Stroke Rate: 1,000 – 2,900 SPM
• Stroke Length: 1 in. (26 mm)
• Cutting Capacity in Wood: 4-3/4 in. (120 mm)
• Cutting Capacity in Steel: 3/8 in. (10 mm)
• Cutting Capacity in Aluminum: 25/32 in. (20 mm)
• Bare Tool Weight: 5.3 lbs.
• Bevel Range: Positive detents at 0°, 15°, 30°, and 45°
• Blade Shank Standard: Universal keyless T-shank clamp

Motor Architecture & Vibration Damping Dynamics

Festool’s EC-TEC brushless motor inside the Festool TRION PS 300 operates with stroboscopic efficiency, delivering variable stroke velocity across 1,000 – 2,900 SPM with near-zero energy loss. The electronic stroke governor ensures that blade speed remains identical whether slicing through 1/4-inch veneer or 4-3/4 in. (120 mm) solid timber beams.

The contoured D-handle housing on the Festool TRION PS 300 gives the operator authoritative two-handed leverage when pushing through heavy structural timber. Micro-textured grip zones reduce hand slip in dusty conditions while dampening reciprocating pulses from the gearcase.

Shoe Base Engineering, Bevel Accuracy & Cut-Line Clarity

Engineered with a die-cast alloy foot, the Festool TRION PS 300 glides steadily across sheet goods without marring pre-finished veneers. Left-and-right bevel adjustments up to 45 degrees enable accurate chamfer cuts, complemented by effective forward debris ejection.

Keyless Blade Clamp & Orbital Action Settings

The Festool TRION PS 300 features an intuitive keyless blade clamp engineered for rapid changeovers. Inserting a T-shank blade engages positive mechanical locking with a reassuring tactile click, while the lever-action release ensures safe removal without burning your fingers.

To balance rapid lumber severance against splinter-free face cuts, the Festool TRION PS 300 provides selectable orbital pendulum levels:

• Setting 0: Vertical reciprocation without orbital swing. Essential for sheet metals, copper tubing, PVC, and chip-free cuts in double-sided melamine veneers.
• Setting 1: Subtle orbital oscillation. Recommended for dense hardwoods like white oak, hard maple, and birch plywood to balance edge smoothness with cut progress.
• Setting 2: Medium pendulum swing. The workhorse setting for general softwood framing (2x4, 2x6) and construction lumber.
• Setting 3: Maximum aggressive orbital thrust. Delivers blistering feed speed for rough dimensioning, timber framing, and demolition work where speed outweighs edge cosmetics.

Frequently Asked Questions About the Festool TRION PS 300

Is the Festool TRION PS 300 sold as a bare tool or a kit?

Most retailers list the Festool TRION PS 300 as a Bare Tool (tool-only), which is ideal for tradespeople who already own Festool 720-Watt 120V AC batteries and chargers. If you are starting fresh on this platform, search for starter bundles that include a battery pack, charger, and carrying bag.

How long does a single charge last on the Festool TRION PS 300?

Runtime varies with material density and feed rate, but a standard 4.0 Ah or 5.0 Ah pack typically delivers between 70 and 120 linear feet of cuts through 3/4-inch plywood or pine before requiring a recharge cycle.

Will old-style slotted blades fit the Festool TRION PS 300?

The tool’s quick-release chuck requires universal T-shank accessories with lateral retaining tangs. Slotted U-shank blades lack the side tangs necessary for tool-free mechanical engagement and should not be used.