DEWALT 20V MAX XR Barrel Grip Jig Saw (DCS335B)

DEWALT 20V MAX XR Barrel Grip Jig Saw (DCS335B): Workshop Positioning & Cutting Capabilities

Designed from the ground up for vibration-damped handling, the DEWALT 20V MAX XR Barrel Grip Jig Saw (DCS335B) is DEWALT’s high-precision answer for finish carpenters navigating complex scribe lines. The balanced Barrel Grip chassis operates in lockstep with the 20V MAX Lithium-Ion drivetrain, enabling the DEWALT DCS335B to produce smooth, chip-resistant edge faces across challenging materials.

Designed for woodworkers demanding surgical control. The low center of gravity and narrow barrel circumference place your guiding hand directly in line with cutting forces for cope cuts and tight radius scrollwork.

Its verified cutting depths of 5-5/16 in. (135 mm) in hardwoods and softwoods, 3/8 in. (10 mm) in steel plate, and 1 in. (25 mm) in extruded aluminum ensure the DEWALT DCS335B handles both delicate curved scrollwork and aggressive jobsite dimensional cuts without bogging down.

Verified Factory Specifications & Physical Dimensions

Below are the verified manufacturer specifications and physical parameters for the DEWALT 20V MAX XR Barrel Grip Jig Saw (DCS335B):

• Power Platform: 20V MAX Lithium-Ion
• Grip Configuration: Barrel Grip
• No-Load Stroke Rate: 1,000 – 3,200 SPM
• Stroke Length: 1 in. (26 mm)
• Cutting Capacity in Wood: 5-5/16 in. (135 mm)
• Cutting Capacity in Steel: 3/8 in. (10 mm)
• Cutting Capacity in Aluminum: 1 in. (25 mm)
• Bare Tool Weight: 4.4 lbs. (bare tool)
• Bevel Range: Positive detents at 0°, 15°, 30°, and 45°
• Blade Shank Standard: Universal keyless T-shank clamp

Motor Architecture & Vibration Damping Dynamics

The brushless motor inside the DEWALT DCS335B is paired with DEWALT’s electronic microprocessor that continuously samples motor draw under heavy feeds. When cutting dense 2-inch white oak or knotted framing lumber, the internal circuitry supplies additional battery amperage to preserve the full 1,000 – 3,200 SPM stroke speed. The counter-balanced drive mechanism noticeably tames hand vibration during extended coping work.

Featuring a low-profile barrel-grip chassis, the DEWALT DCS335B places the operator’s guiding hand substantially closer to the material surface. This lowered center of gravity maximizes steering sensitivity during intricate scrollwork, tight interior radiuses, and inverted scribing passes from underneath panels.

Shoe Base Engineering, Bevel Accuracy & Cut-Line Clarity

DEWALT fitted the DEWALT DCS335B with a heavy-duty all-metal shoe featuring an integrated tool-free bevel lock lever. Positive detents at 0°, 15°, 30°, and 45° ensure rapid and repeatable bevel setups for baseboard moldings. Bright dual LEDs illuminate the blade contact point, eliminating shadows cast by the tool housing.

Keyless Blade Clamp & Orbital Action Settings

Blade swaps on the DEWALT DCS335B are completely tool-free: an all-metal quick-release clamp lever opens the locking jaws, allowing spent or scalding-hot blades to drop out cleanly without direct fingertip contact. The mechanism accepts all universal T-shank blades.

To balance rapid lumber severance against splinter-free face cuts, the DEWALT DCS335B provides selectable orbital pendulum levels:

• Setting 0: Vertical reciprocation without orbital swing. Essential for sheet metals, copper tubing, PVC, and chip-free cuts in double-sided melamine veneers.
• Setting 1: Subtle orbital oscillation. Recommended for dense hardwoods like white oak, hard maple, and birch plywood to balance edge smoothness with cut progress.
• Setting 2: Medium pendulum swing. The workhorse setting for general softwood framing (2x4, 2x6) and construction lumber.
• Setting 3: Maximum aggressive orbital thrust. Delivers blistering feed speed for rough dimensioning, timber framing, and demolition work where speed outweighs edge cosmetics.

Frequently Asked Questions About the DEWALT DCS335B

Is the DEWALT DCS335B sold as a bare tool or a kit?

Most retailers list the DEWALT DCS335B as a Bare Tool (tool-only), which is ideal for tradespeople who already own DEWALT 20V MAX Lithium-Ion batteries and chargers. If you are starting fresh on this platform, search for starter bundles that include a battery pack, charger, and carrying bag.

How long does a single charge last on the DEWALT DCS335B?

Runtime varies with material density and feed rate, but a standard 4.0 Ah or 5.0 Ah pack typically delivers between 70 and 120 linear feet of cuts through 3/4-inch plywood or pine before requiring a recharge cycle.

Will old-style slotted blades fit the DEWALT DCS335B?

The tool’s quick-release chuck requires universal T-shank accessories with lateral retaining tangs. Slotted U-shank blades lack the side tangs necessary for tool-free mechanical engagement and should not be used.