WORX WX478.1
WORX WX478.1 is engineered for dependable woodworking precision and clean curve severance. Features 240v mains / 650w (uk 3-pin plug), multi-stage pendulum action, and tool-free T-shank blade changes for jobsite and home remodeling projects.
- Max Wood Cut: 90 mm
- Max Steel Cut: 8 mm
- Stroke Speed: 1,000–3,100 SPM
- Bare Tool Weight: 2.3 kg
Browse compatible T-shank blades for wood, metal and plastics →
Key Performance Highlights
- 90 mmMax Wood Cut
- 1,000–3,100 SPMStroke Speed
- 20 mmStroke Length
- Top Handle (D-Handle)Grip Style
Engineering Strengths & Performance Advantages
Advantage 1
High-efficiency motor delivers responsive cutting cadence across softwoods, hardwoods, and metal sheet.
Advantage 2
Tool-free blade clamp accepts universal T-shank blades for fast, secure replacements without wrenches.
Advantage 3
Multi-position orbital pendulum mechanism boosts cutting velocity in thick structural lumber.
Advantage 4
Rigid beveling base plate tilts up to 45° for accurate angled miters and bevel cuts.
Advantage 5
Ergonomic top handle (d-handle) geometry with non-slip rubber grip cushions user hand fatigue.
Workshop Checklist & Buying Advice
- Bare Tool designation: On merchant listings like Amazon, "Bare Tool" indicates the package includes only the jigsaw itself. Battery packs and charger are sold separately or bundled in kit versions.
- Universal T-Shank: This tool utilizes standard universal T-shank blades. Older U-shank or universal-hole blades are not recommended.
- Dust collection: For indoor carpentry and cabinetry remodeling, connect an external 1-1/4" vacuum hose adapter to minimize airborne dust.
Workshop Performance Scorecard & Benchmark Ratings
Standardized evaluation measuring blade guide rigidity, vibration dampening, and sustained cutting cadence.
- Cutting Precision & Guide Rigidity8.4 / 10
Square 90° verticality retention and minimal lateral blade deflection in thick timber.
- Vibration Damping & Work Ergonomics8.4 / 10
Dynamic counterbalance control minimizing operator hand fatigue during continuous runs.
- Cutting Cadence & Motor Torque8.6 / 10
Aggressive feed rate through dense hardwoods without speed stalling.
- Cutline Visibility & Dust Clearance8.8 / 10
Integrated blower effectiveness and illumination along marked cut lines.
- Tool-Free Blade Clamp & Bevel Base9.5 / 10
Keyless hot blade ejection mechanism and rigid cast footplate bevel detents.
Orbital Pendulum Dial Guide: Matching Positions 0 to 3 to Your Cut
Orbital pendulum action drives the blade forward on the upstroke and retracts it on the downstroke. Dialing the right setting eliminates tear-out, blade breakage, and overheating.
Position 0: Straight Vertical Reciprocation (No Orbital)
Zero tear-out & dense structural materialsSheet steel, aluminum plate, PVC conduit, acrylic glass, double-sided melamine, and tight radius scrolling.
Position 1: Low Orbital Thrust
Dense hardwoods & 45° bevel cutsWhite oak, maple, butcher block countertops, and 45° miter bevels to prevent lateral blade wander.
Position 2: Medium Orbital Setting
Everyday softwood & plywood standardPine, fir, CDX plywood, OSB subflooring, and general woodworking balancing speed with edge quality.
Position 3: Maximum Orbital Action
High-speed demolition & rough framingStructural 2x4 framing lumber, pressure-treated posts, garden timber, and rough cuts where chip-out does not matter.
Everything You Need to Start Cutting with this Jigsaw
To maximize precision and runtime right out of the box, our woodworking editors recommend pairing this saw with contractor-grade blades and matching power accessories.
WORX WX478.1
WORX WX478.1 is engineered for dependable woodworking precision and clean curve severance. Features 240v mains / 650w (uk 3-pin plug), multi-stage pendulum action, and tool-free T-shank blade changes for jobsite and home remodeling projects.
Bosch Robust Line Wood and Metal (10-Piece Set)
Heavy-duty shockproof case containing premium Clean for Wood, Speed for Wood, and Basic for Metal blades.
Bosch T 101 BR Down-Cut Reverse Blades
Reverse-oriented downward-cutting teeth prevent chip-out and tear-out on visible laminate surfaces.
WORX WX463
WORX
- Power: 240V Mains / 550W (UK 3-Pin Plug)
- Max Wood: 65 mm
- Speed: 0 – 3,000 SPM
WORX WX542.9
WORX
- Power: 18V Lithium-Ion
- Max Wood: 120 mm
- Speed: 0–3,500 SPM
Bosch PST 650
Bosch
- Power: 240V Mains / 500W (UK 3-Pin Plug)
- Max Wood: 65 mm
- Speed: 3,100 SPM
WORX WX478.1: Workshop Positioning & Cutting Capabilities
With the WORX WX478.1, WORX delivers a purpose-built cutting platform tailored for exacting cabinetry installations, sink cutouts, and interior framing. Powered by an adaptive 240V Mains / 650W (UK 3-Pin Plug) system and encased in an ergonomic Top Handle (D-Handle) layout, the WORX WX478.1 maintains unwavering cut squareness even under continuous jobsite duty.
WORX WX478.1 is engineered for dependable woodworking precision and clean curve severance. Features 240V Mains / 650W (UK 3-Pin Plug), multi-stage pendulum action, and tool-free T-shank blade changes for jobsite and home remodeling projects.
Its verified cutting depths of 90 mm in hardwoods and softwoods, 8 mm in steel plate, and 16 mm in extruded aluminum ensure the WORX WX478.1 handles both delicate curved scrollwork and aggressive jobsite dimensional cuts without bogging down.
Verified Factory Specifications & Physical Dimensions
Below are the verified manufacturer specifications and physical parameters for the WORX WX478.1:
- Power Platform: 240V Mains / 650W (UK 3-Pin Plug)
- Grip Configuration: Top Handle (D-Handle)
- No-Load Stroke Rate: 1,000–3,100 SPM
- Stroke Length: 20 mm
- Cutting Capacity in Wood: 90 mm
- Cutting Capacity in Steel: 8 mm
- Cutting Capacity in Aluminum: 20 mm
- Bare Tool Weight: 2.3 kg
- Bevel Range: Positive detents at 0°, 15°, 30°, and 45°
- Blade Shank Standard: Universal keyless T-shank clamp
Motor Architecture & Vibration Damping Dynamics
Engineered for steady workshop duty, the 240V Mains / 650W (UK 3-Pin Plug) motor in the WORX WX478.1 produces a responsive 1.000–3.100 SPM cadence. Balanced rotational counterweights minimize lateral tool wander, helping woodworkers maintain perpendicular cut faces across solid stock.
The contoured D-handle housing on the WORX WX478.1 gives the operator authoritative two-handed leverage when pushing through heavy structural timber. Micro-textured grip zones reduce hand slip in dusty conditions while dampening reciprocating pulses from the gearcase.
Shoe Base Engineering, Bevel Accuracy & Cut-Line Clarity
Engineered with a die-cast alloy foot, the WORX WX478.1 glides steadily across sheet goods without marring pre-finished veneers. Left-and-right bevel adjustments up to 45 degrees enable accurate chamfer cuts, complemented by effective forward debris ejection.
Keyless Blade Clamp & pendulum action Settings
The WORX WX478.1 features an intuitive keyless blade clamp engineered for rapid changeovers. Inserting a T-shank blade engages positive mechanical locking with a reassuring tactile click, while the lever-action release ensures safe removal without burning your fingers.
To balance rapid lumber severance against splinter-free face cuts, the WORX WX478.1 provides selectable orbital pendulum levels:
- Setting 0: Vertical reciprocation without orbital swing. Essential for sheet metals, copper tubing, PVC, and chip-free cuts in double-sided melamine veneers.
- Setting 1: Subtle orbital oscillation. Recommended for dense hardwoods like white oak, hard maple, and birch plywood to balance edge smoothness with cut progress.
- Setting 2: Medium pendulum swing. The workhorse setting for general softwood framing (2x4, 2x6) and construction lumber.
- Setting 3: Maximum aggressive orbital thrust. Delivers blistering feed speed for rough dimensioning, timber framing, and demolition work where speed outweighs edge cosmetics.
Frequently Asked Questions About the WORX WX478.1
Is the WORX WX478.1 sold as a bare tool or a kit?
Most retailers list the WORX WX478.1 as a Bare Tool (tool-only), which is ideal for tradespeople who already own WORX 240V Mains / 650W (UK 3-Pin Plug) batteries and chargers. If you are starting fresh on this platform, search for starter bundles that include a battery pack, charger, and carrying bag.
How long does a single charge last on the WORX WX478.1?
Runtime varies with material density and feed rate, but a standard 4.0 Ah or 5.0 Ah pack typically delivers between 70 and 120 linear feet of cuts through 3/4-inch plywood or pine before requiring a recharge cycle.
Will old-style slotted blades fit the WORX WX478.1?
The tool’s quick-release chuck requires universal T-shank accessories with lateral retaining tangs. Slotted U-shank blades lack the side tangs necessary for tool-free mechanical engagement and should not be used.