Clean Wood Cutting
Bosch T 101 B
Precision ground taper-ground teeth designed for clean, splinter-free straight cuts in softwood, plywood, and furniture panels from 3 to 30 mm (1/8" to 1-1/4").
Jigsaw Blades Guide & Material Catalog
Selecting the proper blade geometry transforms your cut quality. Compare tooth pitch (TPI), kerf thickness, and shank compatibility across leading brands.
Technical Selector
Interactive Jigsaw Blade Selector & Finder
Select your workpiece material and desired cut finish: we will recommend the exact T-shank blade geometry, pendulum action setting, and stroke speed to prevent tear-out or overheating.
Recomendación óptima
Bosch T 101 B (Clean for Wood)
Dentado rectificado cónico sin triscado diseñado para cortes rectos con cantos limpios en madera blanda y tableros.
⚙️ Ajustes en la Caladora
- Movimiento Pendular:
- Nivel 0 a 1 (Bajo o nulo para evitar desgarros)
- Velocidad de carrera:
- Posición 5-6 (Máxima)
- Tipo de vástago:
- Vástago en T (Estándar universal)
💡 Consejo de taller para este corte
Para evitar que la sierra astille la melamina por la cara superior, coloca una tira de cinta de carrocero bien apretada sobre el trazo o corta con la cara buena hacia abajo.
Wood & Laminate Jigsaw Blades
Engineered for clean, rapid, curved, flush, and splinter-free cuts across hardwood, softwood, plywood, and laminate flooring.
Fast Wood Cutting
Bosch T 144 D
High-speed side-set teeth engineered for aggressive, high-speed rip and cross cuts in structural lumber from 5 to 50 mm (7/32" to 2").
Clean Curved Wood Cuts
Bosch T 101 AO
Narrow 1.4 mm kerf body with pointed taper-ground teeth engineered for tight scroll curves and delicate splinter-free contours.
Jigsaw Blade
Makita B-10 A-85628
Makita’s flagship wood and plastic blade for clean, swift cuts in plywood and general timber from 3 to 65 mm (1/8" to 2-1/2").
Flush Wood Cutting
DeWalt DT2074-QZ
Offset blade geometry engineered for flush-to-floor or flush-to-wall horizontal cuts up to 65 mm (2-1/2") without marring adjacent surfaces.
Jigsaw Blade
Bosch EXPERT T 308 B
Patented EXPERT 2-side clean geometry with opposing tooth rows: leaves top and bottom faces completely free of tear-out and splinters.
Jigsaw Blade
Bosch EXPERT T 308 BF
Bi-metal version of the 2-side clean blade. 117 mm length optimized for high-density hardwoods (oak, beech, maple) and abrasive synthetic coatings.
Jigsaw Blade
DeWalt DT2165-QZ
100 mm HCS blade with 2.5 mm fine pitch for clean straight cuts in furniture panels up to 30 mm thickness.
Reverse Tooth Chip-Free Cutting
Bosch T 101 BR
Reverse downward-pointing teeth cutting on the downstroke, leaving the visible top surface completely splinter-free.
Jigsaw Blade
Bosch T 244 D
Narrow-spine Speed for Wood blade with wide 4–5.2 mm tooth pitch designed specifically to turn sharply through thick wood without binding.
Jigsaw Blade
Makita B-50 (B-06460)
Super Express progressive taper-ground teeth (8.5–10.6 TPI) combining rough-cut speed with fine finish smoothness.
Jigsaw Blade
Bosch T 101 AIF
Bi-metal (BIM) blade with ground pointed teeth specifically engineered to resist aluminum oxide abrasive coatings and prevent edge chipping.
Jigsaw Blade
Bosch T 111 C
HCS Basic for Wood blade with 3 mm milled, side-set teeth for swift rough cuts in timber from 4 to 50 mm (5/32" to 2").
Jigsaw Blade
Bosch T 119 BO
Narrow-body HCS scroll blade with 2 mm pitch engineered for tight radius turning and intricate curved profiles in wood from 2 to 15 mm.
Thick Timber Clean & Fast
Bosch T 101 D
High carbon steel (HCS) blade with 4 mm ground teeth delivering deep, clean, splinter-free cuts in thick timber from 10 to 45 mm.
Universal Square 90° Wood Cuts
Festool S 75/4 FSG
Extra-rigid heavy-gauge body with cross-set teeth engineered to eliminate lateral deflection, delivering strictly square 90° edges.
Jigsaw Blade
Festool S 75/2,5
Conical fine-ground teeth (2.5 mm pitch) engineered for flawless splinter-free finishes on high-end architectural woodwork.
Jigsaw Blade
Bosch EXPERT T 367 XFM
Bi-metal progressive teeth engineered for aggressive demolition and remodeling cuts through timber, hardened nails, and thick metal studs.
Jigsaw Blade
DeWalt DT2075-QZ
Narrow high-carbon steel blade with angle-ground teeth for tight radius scrolling without binding or drift in cabinetry and trim.
Metal & Sheet Cutting Blades
High-speed steel (HSS) and bi-metal blades designed for structural sheet metal, aluminum profiles, copper, and non-ferrous conduit.
Thin Sheet Metal
Bosch T 118 A
Fully hardened high-speed steel (HSS) blade with wavy-set milled teeth designed for straight cuts in thin sheet metal from 1 to 3 mm (18 to 11 gauge).
Jigsaw Blade
Bosch T 118 B
HSS blade with 2 mm pitch designed for medium gauge steel (2.5 to 6 mm) and hollow structural profiles.
Jigsaw Blade
Bosch U 118 B
Universal U-shank fitting metal cutting blade for older Black+Decker, Skil, and legacy saws that accept universal U-shanks.
Aluminum & Non-Ferrous Metals
Bosch T 127 D
Fully hardened HSS blade with side-set milled teeth engineered to clear soft metal chips without clogging from 3 to 15 mm.
Jigsaw Blade
Bosch T 123 X
Bi-metal progressive tooth blade (1.2–2.6 mm pitch). Adapts automatically from thin 1.5 mm sheet metal to heavy 10 mm plates and 30 mm pipes.
Plastics, Acrylic & Specialty Materials
Optimized tooth geometries for PVC, acrylic, PMMA, fiberglass, and soft wall tile without melting edges or burning workpieces.
Plastics, PVC & Acrylic Sheet
Bosch T 102 H
Taper-ground HCS blade engineered to cut clean kerfs in technical thermoplastics without edge melting up to 30 mm (1-3/16").
Jigsaw Blade
Bosch T 345 XF
Heavy-duty bi-metal blade with progressive tooth pitch (2.4–5 mm). Slices wood with hidden nails (up to 65 mm) and steel profiles (3–10 mm).
Jigsaw Blade
Bosch EXPERT T 130 RF
Fine carbide grit edge bonded with Bosch Carbide Technology. Cuts curves and shapes in wall tiles and abrasive composites where teeth fail.
Pin-End Scroll Saw Blades
Pin-end specialty blades engineered specifically for the Dremel Moto-Saw compact scroll platform; not compatible with standard T-shank jigsaws.
Jigsaw Blade
Dremel Moto-Saw MS52
Pinned scroll saw blade for the Dremel Moto-Saw MS20, engineered for razor-sharp intricate fretwork up to 12 mm thickness.
Jigsaw Blade
Dremel Moto-Saw MS53
Fine-toothed pinned blade for intricate scroll cuts in soft non-ferrous metals and decorative copper craft sheets up to 3 mm.
Contractor Assortment Packs & Sets
Multi-purpose jobsite sets packed in impact-resistant storage cases covering clean wood, fast roughing, and heavy metal profiling.
Metal & Sheet Cutting
Bosch Robust Line Wood and Metal
Professional 10-piece assortment in heavy-duty Robust Line protective case. Features the most sought-after blades for clean cuts, rapid roughing, and thin to thick metals.
Jigsaw Blade
Makita B-06292
10-piece T-shank assortment featuring legendary Makita B-10, B-13, B-16, B-22, and B-23 references for all-round workshop cutting tasks.
Jigsaw Blade
DeWalt DT2290-QZ
10-piece heavy-duty blade assortment in pocket-sized storage case, featuring fast and fine wood cutting blades along with HSS metal cutting blades.
CROSS-BRAND BLADE MATRIX
Cross-Brand Jigsaw Blade Interchangeability & Equivalency Matrix
Own a Makita, DeWalt, Milwaukee or Festool jigsaw and need the exact equivalent to the industry-standard Bosch code (T101B, T144D, T118A)? Look up matching blades below.
| Application / Cut Type | BOSCH | MAKITA | DEWALT | MILWAUKEE | FESTOOL | Teeth / TPI | Max Depth |
|---|---|---|---|---|---|---|---|
Softwood & Hardwood: splinter-free fine clean cutFine cabinetry, plywood, and exposed solid timber. | T 101 B | B-10 | DT2075 | 48-00-5011 | S 75/2,5 | ||
Wood: ultra-fast and aggressive rough cuttingFraming lumber, formwork studs, and fast construction cuts. | T 144 D | B-11 | DT2074 | 48-00-5012 | S 75/4 FSG | ||
Tight curved, contour, and radius scrolling cutsTemplates, circular sink cutouts, and scroll woodworking. | T 101 AO | B-19 | DT2054 | 48-00-5090 | S 75/1,4 bi | ||
Laminates & Kitchen Worktops: reverse teeth (zero top chip-out)Laminate flooring, installed kitchen countertops, and melamine boards. | T 101 BR | B-18 | DT2053 | 48-00-5013 | S 75/2,5 R | ||
Double-clean: tear-free finish on BOTH top and bottom surfacesInterior doors, high-gloss lacquered panels, and double-sided shelves. | T 308 B | B-50 | DT2058 | 48-00-5015 | S 75/4 FSG | ||
Flush cutting: cuts tight to walls, skirts, and floorsTrimming door frames in place and flush trimming floorboards. | T 142 HB | B-21 | DT2074-QZ | 48-00-5016 | S 105/4 FSG | ||
Sheet metal, thin aluminum, and ferrous profiles (1 to 3 mm)Auto body panels, HVAC ducting, and galvanized metal studs. | T 118 A | B-22 | DT2160 | 48-00-5092 | S 75/1,2 bi | ||
Medium/thick metal plates, structural steel, and pipes (2.5 to 6 mm)Steel pipes, angle irons, and structural metal framing. | T 118 B | B-23 | DT2161 | 48-00-5093 | S 75/2 bi | ||
Stainless steel (Inox) and high-tensile abrasive alloysInox kitchen sinks, marine hardware, and exhaust tubing. | T 118 EHM | B-47 | DT2060 | 48-00-5201 | S 75/1,4 HM | ||
Multi-Material: wood with embedded nails, plastics, and aluminumRenovation demolition, recycled pallets, and plastic plumbing. | T 345 XF | B-16 | DT2076 | 48-00-5014 | S 105/4 bi | ||
Fiber cement, plasterboard, GRP, and abrasive drywall boardsHardie board, exterior fiber cement panels, and glassfiber tanks. | T 141 HM | B-28 | DT2061 | 48-00-5202 | S 75/4,5 HM |
Softwood & Hardwood: splinter-free fine clean cut
30 mmFine cabinetry, plywood, and exposed solid timber.
BOSCHT 101 B
MAKITAB-10
DEWALTDT2075
MILWAUKEE48-00-5011
FESTOOLS 75/2,5
Wood: ultra-fast and aggressive rough cutting
50 mmFraming lumber, formwork studs, and fast construction cuts.
BOSCHT 144 D
MAKITAB-11
DEWALTDT2074
MILWAUKEE48-00-5012
FESTOOLS 75/4 FSG
Tight curved, contour, and radius scrolling cuts
15 mmTemplates, circular sink cutouts, and scroll woodworking.
BOSCHT 101 AO
MAKITAB-19
DEWALTDT2054
MILWAUKEE48-00-5090
FESTOOLS 75/1,4 bi
Laminates & Kitchen Worktops: reverse teeth (zero top chip-out)
30 mmLaminate flooring, installed kitchen countertops, and melamine boards.
BOSCHT 101 BR
MAKITAB-18
DEWALTDT2053
MILWAUKEE48-00-5013
FESTOOLS 75/2,5 R
Double-clean: tear-free finish on BOTH top and bottom surfaces
40 mmInterior doors, high-gloss lacquered panels, and double-sided shelves.
BOSCHT 308 B
MAKITAB-50
DEWALTDT2058
MILWAUKEE48-00-5015
FESTOOLS 75/4 FSG
Flush cutting: cuts tight to walls, skirts, and floors
65 mmTrimming door frames in place and flush trimming floorboards.
BOSCHT 142 HB
MAKITAB-21
DEWALTDT2074-QZ
MILWAUKEE48-00-5016
FESTOOLS 105/4 FSG
Sheet metal, thin aluminum, and ferrous profiles (1 to 3 mm)
3 mmAuto body panels, HVAC ducting, and galvanized metal studs.
BOSCHT 118 A
MAKITAB-22
DEWALTDT2160
MILWAUKEE48-00-5092
FESTOOLS 75/1,2 bi
Medium/thick metal plates, structural steel, and pipes (2.5 to 6 mm)
6 mmSteel pipes, angle irons, and structural metal framing.
BOSCHT 118 B
MAKITAB-23
DEWALTDT2161
MILWAUKEE48-00-5093
FESTOOLS 75/2 bi
Stainless steel (Inox) and high-tensile abrasive alloys
4 mmInox kitchen sinks, marine hardware, and exhaust tubing.
BOSCHT 118 EHM
MAKITAB-47
DEWALTDT2060
MILWAUKEE48-00-5201
FESTOOLS 75/1,4 HM
Multi-Material: wood with embedded nails, plastics, and aluminum
65 mmRenovation demolition, recycled pallets, and plastic plumbing.
BOSCHT 345 XF
MAKITAB-16
DEWALTDT2076
MILWAUKEE48-00-5014
FESTOOLS 105/4 bi
Fiber cement, plasterboard, GRP, and abrasive drywall boards
50 mmHardie board, exterior fiber cement panels, and glassfiber tanks.
BOSCHT 141 HM
MAKITAB-28
DEWALTDT2061
MILWAUKEE48-00-5202
FESTOOLS 75/4,5 HM
Compatibility note: All listed blades feature standard T-Shank (Euro shank) tangs, fitting 99% of modern quick-change toolless jigsaws across all major brands.
PRO TOOL DECODER
Official Brand Model Code & Suffix Decoder
What do suffixes like Z, RTJ, NT, CE or FUEL mean? Select a brand or search any code to understand battery platform, grip style, motor type, and included accessories.
GSTSeries / Family
Professional Blue Range. Reinforced magnesium/aluminum chassis for heavy-duty trades.
PSTSeries / Family
Home & Garden DIY Green Range. Designed for home woodworkers and DIY projects.
18V / 12VPower Platform
Cordless Li-ion battery platform (AMPShare / 18V or 12V Professional System).
B / SGrip / Handle Form
Top bow handle (Bügelgriff / D-handle). Standard grip providing steady downward pressure.
P / SCGrip / Handle Form
Barrel grip (Stabform / Knauf). Low center of gravity, ideal for tight curves and underside cuts.
C / BCSpecial Feature
Connected Ready (Bluetooth module slot to tune stroke speed and LED brightness via Bosch Toolbox app).
CE / BCEMotor & Electronics
Constant Electronic. Maintains motor strokes constant even under deep hardwood resistance.
Solo / Bare / L-BOXXKit & Case Package
Bare tool without batteries/charger. If paired with professional stacking case, labeled L-BOXX.
DJVSeries / Family
Cordless 18V LXT battery platform jigsaw (Makita Lithium-ion Xtreme Technology).
JV / 43xxSeries / Family
Corded 120V/230V electric mains models.
180 vs 181 vs 182Motor & Electronics
180: Brushed motor D-handle. 181: Brushless motor Barrel grip. 182: Brushless motor D-handle.
ZKit & Case Package
Zero Batteries (Bare Tool): Tool body only, without batteries, charger, or Makpac case.
RTJKit & Case Package
Full Kit: 2x 18V 5.0Ah batteries (BL1850B) + DC18RC fast charger + Makpac connector case.
RFJ / RMJKit & Case Package
RFJ: 2x 3.0Ah batteries + Charger + Makpac. RMJ: 2x 4.0Ah batteries + Charger + Makpac.
KKit & Case Package
K = Heavy-duty blow-molded carrying case included (standard in corded 4329K/4350FCT).
DCSSeries / Family
DeWalt Cordless Saw: Battery-powered cutting tool on 18V XR / 20V Max platform.
DW / DWESeries / Family
DeWalt Electric: Corded 120V/230V tools designed for workshop stationary use.
334 vs 335Grip / Handle Form
334: Brushless motor with D-handle (Top Handle). 335: Brushless motor with Barrel Grip.
NKit & Case Package
Bare Tool: Shipped tool-only in cardboard box, no batteries or charger.
NTKit & Case Package
Bare Tool + T-STAK II Case: No batteries or charger, but includes the official stackable T-STAK hard case.
P2Kit & Case Package
Full Kit: 2x 18V 5.0Ah XR batteries (DCB184) + Multi-voltage charger + T-STAK case.
B (EE. UU. / Canadá)Kit & Case Package
North American nomenclature for Bare Tool (e.g. DCS334B = DCS334N in Europe).
M18 vs M12Power Platform
M18: Heavy-duty 18V REDLITHIUM platform. M12: Sub-compact 12V platform for tight spaces.
FUEL (FJS / FBJS)Motor & Electronics
FUEL Technology: POWERSTATE Brushless motor + REDLINK PLUS digital intelligence.
FJS vs FBJSGrip / Handle Form
FJS: D-handle (Top Handle). FBJS: Barrel Grip body for low center-of-gravity curve work.
-0 / -0XKit & Case Package
-0: Bare tool in cardboard box. -0X: Bare tool shipped inside stackable HD Box case.
-502XKit & Case Package
Kit including 2x 5.0Ah M18 REDLITHIUM batteries + M12-18FC fast charger + HD Box.
-20 / -21 / -22 (EE. UU.)Kit & Case Package
US numeric code: -20 is Bare Tool (e.g. 2737-20). -21 is 1-battery kit. -22 is 2-battery kit.
PS vs PSBGrip / Handle Form
PS: Pendulum jigsaw with barrel grip. PSB: Top bow handle (Bügelgriff / D-handle).
300 (Trion) vs 420 (Carvex)Series / Family
300 (Trion): Triple carbide blade guide for dead-square 90° cuts. 420 (Carvex): Lighter, stroboscopic LED, best for extreme curved cuts.
EBQMotor & Electronics
E = Electronic speed regulation. B = Fast mechanical blade brake. Q = Detachable plug-it power cable.
Plus vs Set vs BasicKit & Case Package
Plus: Shipped in Systainer SYS3 case. Set: Systainer + full accessory pack (bases, angle table). Basic: Cordless bare tool in Systainer.
Pro Tip: Buyer tip: Trailing suffixes strictly indicate whether the tool is "bare tool" (body only) or a complete kit with batteries and hard case. Checking this avoids costly mistakes.
Verifying Jigsaw Shank & Blade Compatibility
Modern British and European jigsaws from Bosch, Makita, DEWALT, Milwaukee, and Festool feature keyless tool-free T-shank chucks. Bosch references prefixed with "T" (e.g., T 101 B, T 144 D) utilize this universal standard. The Bosch U 118 B uses a U-shank (universal 1/4 in.) requiring set-screw or legacy collets.
Scroll saw blades like Dremel Moto-Saw MS52 and MS53 feature pin-end retainers designed exclusively for the MS20 compact benchtop saw and will not lock into standard handheld jigsaw chucks.
Recommended Pairings for Popular UK Jigsaws
For the Bosch JS470E corded top-handle jigsaw, standard T 101 B and T 144 D blades provide benchmark cabinet-grade performance. Cordless models such as the DEWALT 18V XR DCS334B or Makita 18V LXT XVJ03Z pair exceptionally well with thin-kerf bi-metal blades that minimize motor draw while preserving battery runtime.
For more technical details, read our complete guide to Jigsaw Blade Types & TPI Selection, or review our guide on How to Cut Metal & Aluminum with a Jigsaw.