Festool TRION PS 300 EQ Jigsaw
A time-tested timber framing and cabinet shop classic. Combines high-torque 720W MMC electronics with carbide guide jaws for rock-solid right-angle cuts through thick lumber.
- Max Wood Cut: 4-3/4 in. (120 mm)
- Max Steel Cut: 3/8 in. (10 mm)
- Stroke Speed: 1,000 – 2,900 SPM
- Bare Tool Weight: 5.3 lbs.
Browse compatible T-shank blades for wood, metal and plastics →
Key Performance Highlights
- 4-3/4 in. (120 mm)Max Wood Cut
- 1,000 – 2,900 SPMStroke Speed
- 1 in. (26 mm)Stroke Length
- Top Handle (D-Handle)Grip Style
Engineering Strengths & Performance Advantages
Advantage 1
Carbide guide jaws eliminate blade flex in heavy framing cuts.
Advantage 2
MMC electronic system maintains constant blade speed through thick knots.
Advantage 3
Splinter guard insert guarantees chip-free cuts on both top and bottom veneer surfaces.
Advantage 4
Direct compatibility with Festool FS guide rails for laser-straight cuts.
Workshop Checklist & Buying Advice
- Bare Tool designation: On merchant listings like Amazon, "Bare Tool" indicates the package includes only the jigsaw itself. Battery packs and charger are sold separately or bundled in kit versions.
- Universal T-Shank: This tool utilizes standard universal T-shank blades. Older U-shank or universal-hole blades are not recommended.
- Dust collection: For indoor carpentry and cabinetry remodeling, connect an external 1-1/4" vacuum hose adapter to minimize airborne dust.
Workshop Performance Scorecard & Benchmark Ratings
Standardized evaluation measuring blade guide rigidity, vibration dampening, and sustained cutting cadence.
- Cutting Precision & Guide Rigidity9.5 / 10
Square 90° verticality retention and minimal lateral blade deflection in thick timber.
- Vibration Damping & Work Ergonomics9.4 / 10
Dynamic counterbalance control minimizing operator hand fatigue during continuous runs.
- Cutting Cadence & Motor Torque9.3 / 10
Aggressive feed rate through dense hardwoods without speed stalling.
- Cutline Visibility & Dust Clearance8.8 / 10
Integrated blower effectiveness and illumination along marked cut lines.
- Tool-Free Blade Clamp & Bevel Base8.9 / 10
Keyless hot blade ejection mechanism and rigid cast footplate bevel detents.
Orbital Pendulum Dial Guide: Matching Positions 0 to 3 to Your Cut
Orbital pendulum action drives the blade forward on the upstroke and retracts it on the downstroke. Dialing the right setting eliminates tear-out, blade breakage, and overheating.
Position 0: Straight Vertical Reciprocation (No Orbital)
Zero tear-out & dense structural materialsSheet steel, aluminum plate, PVC conduit, acrylic glass, double-sided melamine, and tight radius scrolling.
Position 1: Low Orbital Thrust
Dense hardwoods & 45° bevel cutsWhite oak, maple, butcher block countertops, and 45° miter bevels to prevent lateral blade wander.
Position 2: Medium Orbital Setting
Everyday softwood & plywood standardPine, fir, CDX plywood, OSB subflooring, and general woodworking balancing speed with edge quality.
Position 3: Maximum Orbital Action
High-speed demolition & rough framingStructural 2x4 framing lumber, pressure-treated posts, garden timber, and rough cuts where chip-out does not matter.
Everything You Need to Start Cutting with this Jigsaw
To maximize precision and runtime right out of the box, our woodworking editors recommend pairing this saw with contractor-grade blades and matching power accessories.
Festool TRION PS 300 EQ Jigsaw
A time-tested timber framing and cabinet shop classic. Combines high-torque 720W MMC electronics with carbide guide jaws for rock-solid right-angle cuts through thick lumber.
Bosch Robust Line Wood and Metal (10-Piece Set)
Heavy-duty shockproof case containing premium Clean for Wood, Speed for Wood, and Basic for Metal blades.
Bosch T 101 BR Down-Cut Reverse Blades
Reverse-oriented downward-cutting teeth prevent chip-out and tear-out on visible laminate surfaces.
WORX WX463
WORX
- Power: 120V / 5.0 Amp Corded
- Max Wood: 2-9/16 in. (65 mm)
- Speed: 0 – 3,000 SPM
WORX WX478.1
WORX
- Power: 120V / 5.9 Amp Corded
- Max Wood: 3-1/2 in. (90 mm)
- Speed: 1.000–3.100 SPM
Bosch PST 650
Bosch
- Power: 120V / 4.5 Amp Corded
- Max Wood: 2-9/16 in. (65 mm)
- Speed: 3.100 SPM
Festool TRION PS 300 EQ Jigsaw: Workshop Positioning & Cutting Capabilities
With the Festool TRION PS 300 EQ Jigsaw, Festool delivers a purpose-built cutting platform tailored for exacting cabinetry installations, sink cutouts, and interior framing. Powered by an adaptive 720-Watt 120V AC system and encased in an ergonomic Top Handle (D-Handle) layout, the Festool TRION PS 300 maintains unwavering cut squareness even under continuous jobsite duty.
A time-tested timber framing and cabinet shop classic. Combines high-torque 720W MMC electronics with carbide guide jaws for rock-solid right-angle cuts through thick lumber.
Its verified cutting depths of 4-3/4 in. (120 mm) in hardwoods and softwoods, 3/8 in. (10 mm) in steel plate, and 25/32 in. (20 mm) in extruded aluminum ensure the Festool TRION PS 300 handles both delicate curved scrollwork and aggressive jobsite dimensional cuts without bogging down.
Verified Factory Specifications & Physical Dimensions
Below are the verified manufacturer specifications and physical parameters for the Festool TRION PS 300 EQ Jigsaw:
- Power Platform: 720-Watt 120V AC
- Grip Configuration: Top Handle (D-Handle)
- No-Load Stroke Rate: 1,000 – 2,900 SPM
- Stroke Length: 1 in. (26 mm)
- Cutting Capacity in Wood: 4-3/4 in. (120 mm)
- Cutting Capacity in Steel: 3/8 in. (10 mm)
- Cutting Capacity in Aluminum: 25/32 in. (20 mm)
- Bare Tool Weight: 5.3 lbs.
- Bevel Range: Positive detents at 0°, 15°, 30°, and 45°
- Blade Shank Standard: Universal keyless T-shank clamp
Motor Architecture & Vibration Damping Dynamics
Festool’s EC-TEC brushless motor inside the Festool TRION PS 300 operates with stroboscopic efficiency, delivering variable stroke velocity across 1,000 – 2,900 SPM with near-zero energy loss. The electronic stroke governor ensures that blade speed remains identical whether slicing through 1/4-inch veneer or 4-3/4 in. (120 mm) solid timber beams.
The contoured D-handle housing on the Festool TRION PS 300 gives the operator authoritative two-handed leverage when pushing through heavy structural timber. Micro-textured grip zones reduce hand slip in dusty conditions while dampening reciprocating pulses from the gearcase.
Shoe Base Engineering, Bevel Accuracy & Cut-Line Clarity
Engineered with a die-cast alloy foot, the Festool TRION PS 300 glides steadily across sheet goods without marring pre-finished veneers. Left-and-right bevel adjustments up to 45 degrees enable accurate chamfer cuts, complemented by effective forward debris ejection.
Keyless Blade Clamp & Orbital Action Settings
The Festool TRION PS 300 features an intuitive keyless blade clamp engineered for rapid changeovers. Inserting a T-shank blade engages positive mechanical locking with a reassuring tactile click, while the lever-action release ensures safe removal without burning your fingers.
To balance rapid lumber severance against splinter-free face cuts, the Festool TRION PS 300 provides selectable orbital pendulum levels:
- Setting 0: Vertical reciprocation without orbital swing. Essential for sheet metals, copper tubing, PVC, and chip-free cuts in double-sided melamine veneers.
- Setting 1: Subtle orbital oscillation. Recommended for dense hardwoods like white oak, hard maple, and birch plywood to balance edge smoothness with cut progress.
- Setting 2: Medium pendulum swing. The workhorse setting for general softwood framing (2x4, 2x6) and construction lumber.
- Setting 3: Maximum aggressive orbital thrust. Delivers blistering feed speed for rough dimensioning, timber framing, and demolition work where speed outweighs edge cosmetics.
Frequently Asked Questions About the Festool TRION PS 300
Is the Festool TRION PS 300 sold as a bare tool or a kit?
Most retailers list the Festool TRION PS 300 as a Bare Tool (tool-only), which is ideal for tradespeople who already own Festool 720-Watt 120V AC batteries and chargers. If you are starting fresh on this platform, search for starter bundles that include a battery pack, charger, and carrying bag.
How long does a single charge last on the Festool TRION PS 300?
Runtime varies with material density and feed rate, but a standard 4.0 Ah or 5.0 Ah pack typically delivers between 70 and 120 linear feet of cuts through 3/4-inch plywood or pine before requiring a recharge cycle.
Will old-style slotted blades fit the Festool TRION PS 300?
The tool’s quick-release chuck requires universal T-shank accessories with lateral retaining tangs. Slotted U-shank blades lack the side tangs necessary for tool-free mechanical engagement and should not be used.